turn
-
Track made of insulated aluminium profiles; maximum output 300 VA per transformer; conductive track cross-section 2 × 30 mm²; maximum length of circuit when using an end feed is 15 metres or 30 metres when using a central power middle feed; surface finishes available in brushed nickel, chrome, pearl chrome, gold (24 ct); three standard track lengths; field cuttable; field bendable; minimum radius for alutransparent track 175 mm, minimum radius for all other track finishes 250 mm.
look
-
Rail made of insulated interlinked aluminium profiles; maximum output: 300 VA per transformer conductive rail cross-section: 2 × 30 mm²; as a rule of thumb: maximum length of circuit when using an end feed is 15 metres or 30 metres when using a central power middle feed, finishes: chrome, pearl chrome, gold (24 ct), 3 standard rail lengths, field cuttable, can be bent by factory, minimum radius: 400 mm.
onstage
-
Rails made of parallel guided copper tubes, tube spacing: 45 mm; maximum output: 300 VA per transformer; conductor cross-section: 2 × 16 mm2; maximum system length: 10 metres when using end power feed and 20 metres when using power middle feed; available finishes: chrome, pearl chrome,
gold-plated (24 carat); 3 standard rail lengths, field cuttable; can be bent to order by manufacturer; minimum radius: 250 mm.
onair
-
Cable system with tin-plated or brass-plated copper conductors, insulated or non-insulated, with Kevlar reinforcement if required; max. output: 300 VA per transformer; conductor cross-section: 4 or 6 mm²; guideline for maximum system length (6 mm² power cable): 6 metres with end feed, 12 metres with middle feed; available surfaces: chrome, pearl chrome, gold; track width 100 mm.
kliks
-
Using the appropriate plug-in system adapter spots and pendant lights can be used on any of the four low-voltage systems. Furthermore you can create a wide range of single lights when using the kliks canopies and ceiling mounts.
